Curb View Mirror possible for Q3 2015?

Yes. Just adjust the passenger mirror to the desire position while having the car on reverse. It will go back to the original position when you start driving foward

felipefaccini said:

Yes. Just adjust the passenger mirror to the desire position while having the car on reverse. It will go back to the original position when you start driving foward

Click to expand...

BUT - you must leave the switch pointed to the right side mirror for it to engage in reverse to the same dipped position next time ... If you return the switch to the center position, the next time you select reverse, nothing will happen.

So, the ignition must be on? Also, does the emergency brake have anything to do with the setting?

Welcome to the forum!

Phil429 said:

So, the ignition must be on? Also, does the emergency brake have anything to do with the setting?

Click to expand...

Ignition on, e-brake nothing ... BUT, if you have a Canadian car, this may need to be 'allowed' in VCDS...

rnlabas said:

BUT - you must leave the switch pointed to the right side mirror for it to engage in reverse to the same dipped position next time ... If you return the switch to the center position, the next time you select reverse, nothing will happen.

Click to expand...

So I guess this is the reason why I have to reprogram it every couple of weeks ???

felipefaccini said:

So I guess this is the reason why I have to reprogram it every couple of weeks ???

Click to expand...

If you just put the switch back to the passenger side, it should recall where it was last set. There is a setting in VCDS to allow/disallow this function though -

Learning something new everyday here! :thumbs up:

For some reason, I can not get this to work... I turn on the ignition, put the car in reverse and set the passenger side mirror to the curb but, nothing happens (I leave the switch point on the right) when I put it in drive or try to park. Any suggestions?

It doesn't goes bad to the original position as soon as you put it on drive. I think you need to get to 10 mph before it goes back

Phil429 said:

For some reason, I can not get this to work... I turn on the ignition, put the car in reverse and set the passenger side mirror to the curb but, nothing happens (I leave the switch point on the right) when I put it in drive or try to park. Any suggestions?

Click to expand...

First, have your passenger mirror set to where you want it when moving forward. THEN put the switch to the passenger side, THEN put the car in reverse - THEN adjust the mirror to where you want the curb view - usually down and maybe a bit inwards. THEN leave the switch at the passenger side - and when moving forward (at about 5 mph or more, same for rear-view camera turning off), the mirror should return to its first setting -

If this does NOT work, you may have to program its allowability in VCDS. Curiously (I can't tell from your profile panel) where are you?

Thanks, Roger! I will give it a try when I get home. I'm from San Francisco.

Does every Q3 has the mirror dip-down option?

I also have never made it work.

PuroMexicano said:

Does every Q3 has the mirror dip-down option?

I also have never made it work.

Click to expand...

I think so, but as noted above - it may need to be activated or allowed in VCDS first...

rnlabas said:

i think so, but as noted above - it may need to be activated or allowed in vcds first...

Click to expand...

thanks!