Audi Q3 Forum banner
1 - 14 of 14 Posts

· Premium Member
Joined
·
2,485 Posts
Discussion Starter · #1 · (Edited)
Enable Hidden menu in MMI 3G

[5F - Information Electr.]
[Adaptation - 10] -> [Channel 5] - {Note : may be Channel 6, check description in VCDS}
Change 0 to 1
Test
Save
Done, Go Back

After coding, to access the hidden menu, hold down Car and Menu together for 5 seconds

Use this hidden menu at your own risk.
 

· Registered
Joined
·
300 Posts
OK, you have me intrigued.

Does this hidden (green) menu save fuel, reduce emissions, buy carbon offsets or something green like that? Or some other type of green stuff?? Turn the Q3 into a Hulk-mobile maybe?
 
  • Like
Reactions: dipaola

· Premium Member
Joined
·
2,485 Posts
Discussion Starter · #3 ·
OK, you have me intrigued.

Does this hidden (green) menu save fuel, reduce emissions, buy carbon offsets or something green like that? Or some other type of green stuff?? Turn the Q3 into a Hulk-mobile maybe?
Nahhh, none of that stuff - it's just literally a monochrome green (actually light and dark green) screen. >:D
 
  • Like
Reactions: dipaola

· Premium Member
Joined
·
2,485 Posts
Discussion Starter · #6 ·
Okay, but it must be for something other than being green. Some type of secret screen for engineers to play with the background coding or something like that.
Otto - it IS all of that ... and more - >:D
 

· Premium Member
Joined
·
2,485 Posts
Discussion Starter · #8 ·
If it doesn't actually add any features then why is it called MMI 3G green screen?
It's called the green screen on all current Audis. It is intended to review and remark features and options on the car that correlate with the car's programming. It's NOT intended to be used by the consumer for additional 'features' - think of it as your PC's DOS window (Command Prompt) or Task Manager compared with its GUI Control Panel ...
 

· Registered
Joined
·
50 Posts
To complement this post. I try to change the channel 6 and never is accepted, but I discover that in some models you use the same procedure as described by Roger but instead of the Channel 6 use the Channel 5, and it works 0:)

Enable Hidden menu in MMI 3G

[5F - Information Electr.]
[Adaptation - 10] -> [Channel 6]
Change 0 to 1
Test
Save
Done, Go Back

After coding, to access the hidden menu, hold down Car and Menu together for 5 seconds

Use this hidden menu at your own risk.
 

· Premium Member
Joined
·
2,485 Posts
Discussion Starter · #11 ·
Good catch - mine was already enabled and I did not need to adapt this channel's value. I'll make a note in the original post -

Thanks ...
 

· Registered
Joined
·
2 Posts
Could someone give me the original data configuration in the hidden - car menu? I changed the data and I don't know what the previous data was. Could you take a picture of the green menu - CAR, and send? I have an Audi Q3 2016.
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top