Audi Q3 Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
Hello folks,


After trying the procedure described in the manual, it appears that this feature doesn't work.
What I did was: with the engine running, in reverse, tilted the passenger mirror down and left the knob in that position.
Then after driving forward or turning the engine off (both mentioned in the manual), the mirror didn't budge.

Any idea what I might have done wrong?

Thank you
 

·
Premium Member
Joined
·
2,484 Posts
Yes - you need to adjust the mirror in gear (or Park - but NOT Reverse). Then cycle the ignition with the switch in the neutral position. Then start the car and BEFORE you engage reverse, set the switch over to the passenger mirror. Then select Reverse and it should dip. Then AFTER you go forward to at least 15 kph or 9 mph, it will return to the position you set in the first place.
 
1 - 2 of 2 Posts
Top