Audi Q3 Forum banner

trunk/hatch coding?

10519 Views 6 Replies 4 Participants Last post by  D&G
is there a way to code the 2016 Q3 hatch to close with the remote or even the interior release lever?
1 - 7 of 7 Posts
is there a way to code the 2016 Q3 hatch to close with the remote or even the interior release lever?
It will close with the interior switch if you keep your foot on the brake and hold the switch up. I am not aware of any coding to close with the key fob.
thanks for the info. I didn't know it does that.


I hope the key fob can be coded for that.
I got my RT cable yesterday and have been digging around. Came across this section that should allow you to close the hatch with the remote but it says "security access required" when trying to save. Anyone have a security code for this section? It's in the "Installed 2" menu tab.

[6D - Trunk Elect.]
[Adaptation - 10] -> (4)-Activation using rear lid opening button in remote key-Tap function for closing
set to active


-Andy
Close rear hatch with remote (key-Tap)

Ok, I found the security code and it works. Here are the codes to close the rear hatch with a single press instead of holding the button down on the remote. Tested on a 2016 Q3.

[6D - Trunk Elect.]
[security Access - 16] -> code: 12345
[Adaptation - 10]
(3)-Activation using rear lid opening button in remote key-Touch function for closing
not active
(4)-Activation using rear lid opening button in remote key-Tap function for closing
active


Enjoy!

-Andy
See less See more
is there a way to code the 2016 Q3 hatch to close with the remote or even the interior release lever?
Hello....can someone tell me step by step how to activate the closing of our 2016 Q3 hatch with the key fob? Thank you!
Do I need I computer to make this change?
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top